PURCHASE AND INSTALL OF MULTIPLE COMPONENTS ON A 2026 FORD F-350

What the notice says

This requirement is for the installation of necessary components on a 2026 FORD F-350 (Tag number G61D0359 , VIN# 1FD8W3FT7TEE20765). All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60-inch cab to axle Front Bumper - Warn 12K winch with wire rope. - mounted in front of bumper. Truck -Cab length running boards Enclosed Utility Body Body -Either 8 or 9ft feet in length - Fully enclosed service body. Similar to Reading TPA60-98SW, or Knapheide KUVCC, or equivalent. -Overall height not to exceed 100 inches. -Made of steel. -Barn door style double door, with windows and security screens. -Tapered sides - Side compartments on topper portion of body, Picture below -1 st Front vertical compartment -C Tech or equivalent style drawer system. -2 nd horizontal bin -1 adjustable shelves with dividers -3rd Rear Vertical Bin -3 adjustable shelves with dividers -Compartment lights in each bin -Utility Box compartment lighting -Central Locking System -In floor Tiedown - Minimum of 22 inches of ground clearance after installation Hitch and Bumper -Class 5 receiver hitch Rated at no less than 18,000lbs -Trailer Electrical plug wired to SAE J2863 standard - Back up camera -Centrally located and protected rear view camera mount